PON Interface

1 GPON BOB （Bosa on Board）

Receiving sensitivity: ≤-28dBm

Transmitting optical power: +1~+4dBm

Transmission distance: 20KM

Wavelength

TX: 1310nm, RX: 1490nm

Optical Interface

SC/APC Connector

Design Scheme

RTL9602C+RTL8192FR+Si32192 BOB(RTL8290B)

Chip Spec

CPU 625MHz,DDR2 64MB

Flash

SPI Nor Flash 16MB

LAN Interface

1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector

Wireless

Compliant with IEEE802.11b/g/n,

Operating frequency: 2.400-2.4835GHz

support MIMO, rate up to 300Mbps,

2T2R,2 external antenna 5dBi,

Support: Multiple SSID

Channel: Auto

Modulation type: DSSS, CCK and OFDM

Encoding scheme: BPSK, QPSK, 16QAM and 64QAM

CATV Interface

RF, WDM, optical power : +2~-15dBm

Optical reflection loss: ≥45dB

Optical receiving wavelength: 1550±10nm

RF frequency range: 47~1000MHz, RF output impedance: 75Ω

RF output level: 78dBuV

AGC range: -13~+1dBm

MER: ≥32dB@-15dBm

LED

9 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、 Worn、 Normal(CATV)

Push-Button

3,For Function of Reset, WLAN, WPS

Operating Condition

Temperature: 0℃~+50℃

Humidity: 10%～90%（non-condensing）

Temperature: -30℃~+60℃

Humidity: 10%~90%（non-condensing）

Power Supply

DC 12V/1A

Power Consumption

≤6W

Dimension

180mm×107mm×28mm（L×W×H）

Net Weight

0.2Kg

WIFI

On

The WIFI interface is up.

Blink

The WIFI interface is sending or/and receiving data (ACT).

Off

The WIFI interface is down.

WPS

Blink

The WIFI interface is securely establishing a connection.

Off

The WIFI interface does not establish a secure connection.

PWR

On

The device is powered up.

Off

The device is powered down.

LOS

Blink

The device doses not receive optical signals or with low signals.

Off

The device has received optical signal.

PON

On

The device has registered to the PON system.

Blink

The device is registering the PON system.

Off

The device registration is incorrect.

LAN1~LAN2

On

Port (LANx) is connected properly (LINK).

Blink

Port (LANx) is sending or/and receiving data (ACT).

Off

Port (LANx) connection exception or not connected.

Worn (CATV)

On

Input optical power is higher than 3dbm or lower than -15dbm

Off

Input optical power is between -15dbm and 3dbm

Normal (CATV)

On

Input optical power is between -15dbm and 3dbm

Off

Input optical power is higher than 3dbm or lower than -15dbm